Genasun GV-10-Pb-12V 10.5A Solar Charge Controller with MPPT for Lead Acid Batteries
Genasun GV-10 10.5A Solar Charge Controller with MPPT for Lead Acid Batteries
A Perfect Match for Solar Panels Between 20W - 160W* The GV-10 was designed to maximize the usable energy from a 140W panel. With Continuous Maximum Power Point Tracking, and night consumption of only 0.9mA, the GV-10 delivers results. In fact, the GV-10 is so effective at increasing panel output, it lowers your system cost ($/W) compared to a PWM controller and larger panel.
Mission-Critical Reliability Genasun controllers are deployed to the most remote locations on earth. They endure years at sea, harsh Antarctic winters, freezing conditions in the upper atmosphere on solar powered airplanes, and in a few off-the-map locations. Made in the USA, each controller is put through complete electrical testing to ensure reliability. If you need mission-critical power, this is your controller.
High-Speed MPPT: Always on Target Not all Maximum Power Point Tracking controllers are created equally. Most use a sweep and sleep method that scans the entire voltage range every 30-60 seconds. That's okay for a clear day, but traditional controllers are constantly off target during changing cloud conditions – exactly when power is scarce and needs are the highest. Genasun controllers adapt to changing light conditions 20 times every second. They are always on target, capturing every bit of available sunshine. Simply put, other controllers can't keep up.
Computer-controlled, 4-Stage battery charging Precise computer controlled charging ensures the optimal charge cycle for your battery. This increases the battery life, and maximizes battery capacity.
Made in the USA
Rated Battery Output Current: 10.5A
Nominal Battery Voltage: 12V
Absolute Max Panel Voltage (Voc): 34V
Recommended Max Voc at STC: 27V
Minimum Battery Voltage for Operation: 8.5V
Input Voltage Range: 0-34V
Max Input Short Circuit Current: 10.5A (panel specs must be factored in as well)